Model 10P Radial Arm Polisher
Motor
10 HP, 1750 RPM, TEFC, Baldor (USA) inverter-duty motor
Spindle
Variable speed, 45-450 RPM
Back Post Raise & Lower
14 inches. For adjusting spindle position to work piece. Post and lift screw have bellows covers
Spindle Horizontal Range
9ft-4in arm will cover 5ft x 10ft to 3ft x 14ft work surface. 360 degree rotation on back post for 1 to 4 work stations
Polishing Plate & Rocker Pin Coupling
Required for polishing is included. Purchase diamond and polishing disks separately.
Available Voltage
208, 230, or 460 volt three phase power. Customer must specify
Foundation
Requires engineered footing/foundation such as required for a jib crane. Requires elevated foundation or special flanged spool piece to achieve desired working height
Available options include:
Pneumatic down force system for precise control of tooling pressure on work piece
Spool spacer for raising height of machine when foundation is flush to floor
Benches. Saw-horse style with leveling legs and 6” height adjusters, for positioning and leveling work piece parallel to the swing-plane of the spindle
230 Volt, single phase power
| Motor | 10 HP, 1750 RPM, TEFC, Baldor (USA) inverter-duty motor |
| Spindle | Variable speed, 45-450 RPM |
| Back Post Raise & Lower | 14 inches. For adjusting spindle position to work piece. Post and lift screw have bellows covers |
| Spindle Horizontal Range | 9ft-4in arm will cover 5ft x 10ft to 3ft x 14ft work surface. 360 degree rotation on back post for 1 to 4 work stations |
| Polishing Plate & Rocker Pin Coupling | Required for polishing is included. Purchase diamond and polishing disks separately. |
| Available Voltage | 208, 230, or 460 volt three phase power. Customer must specify |
| Foundation | Requires engineered footing/foundation such as required for a jib crane. Requires elevated foundation or special flanged spool piece to achieve desired working height |
| Available options include: | |
| Pneumatic down force system for precise control of tooling pressure on work piece | |
| Spool spacer for raising height of machine when foundation is flush to floor | |
| Benches. Saw-horse style with leveling legs and 6” height adjusters, for positioning and leveling work piece parallel to the swing-plane of the spindle | |
| 230 Volt, single phase power | |
Back to the Products Page | Back to the Architectural Stone Page